Axis Q8752-E - Connect the Cables

AXISQ8752-EBispectralPTZCamera
Connectthecables
1.Loosenthefourlidscrews(T20)andremovethelid.
1
Inputpowerconnector
2
I/Oconnector
3
RJ45connector
4
SFPslotforSFPmodule(SFPmodulenotincluded)
2.Connectthenetwork(opticalbreand/orRJ45),I/Oandpowercables.Formore
informationondifferentnetworkconnectivityoptions,seeInstallthenetworklinkon
page17.
3.Returnthelidtoitspositionandtightenthefourlidscrews(torque3.0Nm).
18