AXISV5925PTZNetworkCamera
Configureyourdevice
ControlthecamerawithVISCAoverIP
Note
UsingtheIPprotocolforPTZcontrolincreasestheriskofunauthorizedaccess.ItenablesUDPonports52380and52381,
whichallowsanyoneonthenetworktochangesettingswithouthavingtologintothecamera.
1.GotoSettings>System>Accessories.
2.TurnonVISCA.
3.SelectVISCAoverIP.
ControlthecamerawithVISCAoverserial
1.ConnectaserialcabletotheRS232connector.
2.GotoSettings>System>Accessories.
3.TurnonVISCA.
4.SelectVISCAoverserial.
5.Selectthecamera’sPositioninseries.
-SelectPointtopointifthedeviceisdirectlyconnectedtotheVISCAcontroller.
-SelectEndpointifthedeviceisthelastdeviceinthedaisychain.
-SelectIn-chain(daisychain)ifthedeviceisinthemiddleofthedaisychain.
6.SelectBaudrate.
Viewandrecordvideo
Thissectionincludesinstructionsaboutconguringyourdevice.Tolearnmoreabouthowstreamingandstorageworks,goto
Streamingandstorageonpage61.
Reducebandwidthandstorage
Important
Reducingthebandwidthcanresultinlossofdetailsintheimage.
1.GotoVideo>Stream.
2.Click
intheliveview.
3.SelectVideoformatH.264.
4.GotoVideo>Stream>GeneralandincreaseCompression.
5.GotoVideo>Stream>Zipstreamanddooneormoreofthefollowing:
-SelecttheZipstreamStrengththatyouwanttouse.
Note
TheZipstreamsettingsareusedforbothH.264andH.265.
-TurnonDynamicFPS.
-TurnonDynamicGOPandsetahighUpperlimitGOPlengthvalue.
13