Need help?Do you have a question about the Axon Fleet 3 and is the answer not in the manual?
General| GPS | Yes |
|---|---|
| Connectivity | Wi-Fi, Bluetooth |
| Night Vision | Yes |
| Storage | 128 GB |
| Battery | Rechargeable Lithium-Ion |
Lists the components included in the Axon Fleet 3 Wireless Microphone hardware kit.
Details the hardware kit required for charging the wireless microphone outside of a vehicle.
Explains the function and behavior of the Top Status LED on the wireless microphone.
Details the LED, audio, and haptic notifications for various operating modes of the microphone.
Explains the procedure for charging the battery of the Axon Fleet 3 Wireless Microphone.
Explains how firmware updates are performed for the wireless microphone and charging base.
Details the procedure for powering on the Axon Fleet 3 Wireless Microphone by pressing the power button.
Describes the default state of the wireless microphone after successful pairing, indicated by "READY".
Details how to identify a fully charged battery on the wireless microphone via the LCD.
Describes the display and indicators when the wireless microphone battery charge is low.
Explains the indicators for a critical battery level and associated haptic/audio warnings.
Describes how to enable Stealth mode, turning off lights, haptics, and sounds for discreet operation.
Describes how to disable Stealth mode, restoring normal operation and indicators.
Explains how to decrease the speaker volume of the wireless microphone using the volume down button.
Details how to mute the wireless microphone during an active recording by holding the select button.
Describes how the system handles mute or record requests when the microphone is out of range.
Clarifies that recordings cannot be stopped directly from the wireless microphone and must be initiated elsewhere.
Explains how to handle error states and indicates the "ERROR" display on the LCD for troubleshooting.
Describes the thermal shutdown mode and indicators when battery temperature limits are exceeded.
Details the "MIC ON" and "MIC OFF" states displayed on the Fleet Dashboard to confirm operational status.
Describes how audio track selection works for wireless microphone recordings within the Axon Evidence application.
Lists and shows the various components included for wireless microphone installation.
Lists the specific hardware components included for mounting the charging base.
Provides guidance on resolving error states by rebooting the wireless microphone device.
Lists contact information and resources for obtaining technical support for the product.
States that Axon Enterprise warranty provisions apply to all Axon Fleet system products.
Directs users to the official website for a comprehensive list of product warnings.
Details FCC compliance requirements and potential interference issues for the wireless device.
Advises on RF exposure compliance requirements for Canadian users when operating the device.
To Next Page
