Axon Fleet 3 Wireless Microphone Installation and User Manual
Axon Enterprise, Inc. Page 9 of 28
Pairing the Microphone
The first time the Wireless Microphone is docked in a Charging Base, it will enter the pairing process.
Once paired, the microphone automatically reconnects when:
- The Wireless Microphone goes out of range and comes back in range.
- The Wireless Microphone is powered off and then powered back on.
- Pairing will reoccur if the Wireless Microphone is placed in a different charging base. When
this happens, it loses pairing with its original charging base and becomes paired with its new
charging base.
For simplicity, pairing and reconnection have the same experience:
Pairing Process: LCD displays "PAIRING" and the LED is white.
Successful Pairing and Connection: LCD displays “READY” and the LED shows the charge level (if
docked) or the recording status (if undocked).
Note: No audio is recorded while the mic is docked.
Firmware Updates
Firmware updates for the Axon Fleet 3 Wireless Microphone and Charging Base are executed
through the Fleet Dashboard application.
Note: Always dock the Wireless Microphone before installing a Fleet 3 update so the
Wireless Microphone also receives the latest update.
To Next Page
Loading...
