Axon Fleet 3 Wireless Microphone Installation and User Manual
Axon Enterprise, Inc. Page 16 of 28
Recording Start
Control: Double-press the Event button.
The LEDs will blink red, "RECORDING" word and icon will appear on the LCD display, and the device
will emit a sound and haptic vibration every 2 minutes while recording.
Note: No audio is recorded while the mic is docked.
Recording Stop
Control: It is not possible to terminate active recordings from the Wireless Microphone. All
recording termination events must be initiated from the Fleet Dashboard application or the front
camera primary button.
LEDs go back to flashing green and display shows "READY”.
To Next Page
Loading...
