Axxess GMOS-044 User Manual

Installation instructions for part GMOS-044
Axxess Integrate
CAUTION! All accessories, switches, climate controls panels, and
especially air bag indicator lights must be connected before cycling
the ignition. Also, do not remove the factory radio with the key in the
on position, or while the vehicle is running.
Connections to be made ..................................... 2-3
Installing the GMOS-044 ....................................... 3
Initializing the GMOS-044...................................... 3
Adjusting the GMOS-044 ....................................... 4
Personalization Menu ............................................ 4
No OE Steering Wheel Controls ............................. 5
• Provides accessory power (12-volt 10-amp)
• Retains R.A.P. (retained accessory power)
• Used in amplified or non-amplified systems
• Retains chimes
• Provides NAV outputs (parking brake, reverse, mute, and speed sense)
• Prewired ASWC-1 harness included (ASWC-1 sold separately)
• Retains OnStar/OE Bluetooth
• Adjustable volume for chimes and OnStar
• High level speaker input
• Micro “B” USB updatable
• Retains balance and fade
FEATURES
• Cutting tool • Crimping tool • Tape
• Connectors (example: butt-connectors, bell caps, etc.)
TOOLS REQUIRED
GMOS-044
Chevrolet Cruze 2011-2015 / Cruze Limited 2016
(
with monochrome screen)
• GMOS-044 interface • GMOS-044 harness
INTERFACE COMPONENTS
Table of Contents

Axxess GMOS-044 Specifications

General

Chime Retention	Yes
Amplifier Retention	Yes
Type	Interface Module
Product Type	Radio Replacement Interface
Features	Retains factory-installed amplified audio system
Wiring Harness	Yes

Summary

Connections to be Made

16-pin Harness Connections

Wiring instructions for the 16-pin harness to the aftermarket radio.

18-pin Harness Connections

Wiring instructions for the 18-pin harness to the aftermarket radio.

44-pin Harness Connections

Wiring instructions for the 44-pin harness to the aftermarket radio.

ASWC-1 Harness Integration

Instructions for using the pre-wired ASWC-1 harness for steering wheel controls.

Installing the GMOS-044

Initial Installation Step

Connect the GMOS-044 harness to the interface and vehicle with the key in the off position.

Initializing the GMOS-044

Initialization Procedure

Turn ignition on, wait for radio, then turn off and to accessory to test functions.

Adjusting GMOS-044 Settings

Chime Level Adjustment

Adjust chime volume using a potentiometer with the driver's door open.

OnStar Volume Adjustment

Adjust OnStar volume using steering wheel controls or by grounding a wire.

Personalization Menu Operation

Accessing and Navigating Menu

Use steering wheel buttons to navigate and select options in the personalization menu.

No OE Steering Wheel Controls

ASWCSTALK for Retained Controls

Wiring and usage for ASWCSTALK to retain personalization features.