4-24
4-7-6. Shut-Off Count
Counts the total number of times that the valve is fully closed.
Select [Diagnostics] >> [Valve Diagnostic Information] >> [Shut-Off Count]. You will be able
to check or modify the following items. To change a value, select the item and then change it.
Shut-Off Count
Displays and allows modification of the total fully closed count.
Update Shut-Off Count
Updates the fully closed count to the latest value.
Select the [Update Shut-Off Count] menu to execute the update.
Shut-Off Count Threshold
Displays and allows modification of the threshold. An alarm occurs if the fully closed count
reaches or exceeds this value.
Shut-Off Count Alarm Enabled
Displays and allows modification of the alarm enabled/disabled status. If the status is Enabled,
alarms will occur, and if the status is Disabled, alarms will not occur.
4-7-7. Max Travel Speed
The maximum operating speed per unit time of the valve.
Select [Diagnostics] >> [Valve Diagnostic Information] >> [Max Travel Speed]. You will
be able to check or modify the following items. To change a value, select the item and then
change it.
Max Tvl Speed +, Max Tvl Speed −
Displays and allows modification of the maximum operating speed on the “+” side and “−”
side.
Update Max Tvl Speed
Updates the maximum operating speed to the latest value.
Select the [Update Max Tvl Speed] menu to execute the update.
Clear Max Tvl Speed
Deletes the maximum operating speed.
Select the [Clear Max Tvl Speed] menu to clear the count.
Max Tvl Speed Threshold +, Max Tvl Speed Threshold −
Displays and allows modification of the thresholds on the “+” side and “−” side. An alarm
occurs if the maximum operating speed is outside the range specified by the thresholds.
Max Tvl Speed Alarm Enabled
Displays and allows modification of the alarm enabled/disabled status. If the status is Enabled,
alarms will occur, and if the status is Disabled, alarms will not occur.
To Next Page
Loading...
Need help?
General
