Azbil 100 Series User Manual

4-25
4-7-8. Deviation Alarm
Select [Diagnostics] >> [Valve Diagnostic Information] >> [Deviation Alarm]. You will be
able to check or modify the following items.
Deviation
Displays the position deviation value.
Deviation Threshold +, Deviation Threshold −
Displays and allows modification of the thresholds on the “+” side and “−” side. An alarm
occurs if the position deviation exceeds this value.
Deviation Waiting Time
Displays and allows modification of the waiting time. An alarm occurs if the position
deviation exceeds the threshold and this amount of time has elapsed.
Deviation Alarm Enabled
Displays and allows modification of the alarm enabled/disabled status. If the status is Enabled,
alarms will occur, and if the status is Disabled, alarms will not occur.
4-7-9. Temperature Alarm
Select [Diagnostics] >> [Valve Diagnostic Information] >> [Temperature Alarm]. You will be
able to check or modify the following items.
Temperature
Displays the temperature
Temp Threshold High, Temp Threshold Low
Displays and allows modification of the upper and lower thresholds. An alarm occurs if the
temperature goes beyond one of these values and the waiting time has elapsed.
Temp Waiting Time
Displays and allows modification of the waiting time. An alarm occurs if the temperature goes
beyond a threshold and this amount of time has elapsed.
Temp Alarm Enabled
Displays and allows modification of the alarm enabled/disabled status. If the status is Enabled,
alarms will occur, and if the status is Disabled, alarms will not occur.

Azbil 100 Series Specifications

General

Brand	Azbil
Model	100 Series
Category	Valve Positioners
Language	English