Overview Azbil Corporation
6 Model MGR13C/MGR11U - MagneW3000 Electromagnetic FLowmeter Hyper-Fill
2-3-2 : Pulse output wiring
The pulse output is an open collector output. Pay attention to voltage and polarity
when wiring.
External power supply voltage 12 to 24V DC (30V max.)
Output current 100 mA max.
Transient response 5 μS typ.
Power supply
voltage
Voltage drop (closed
circuit) (HIGH voltage)
Voltage drop (Open
circuit) (LOW voltage)
24V DC 19V min. 2.5V max.
12V DC 7V min. 2.5V max.
Figure 3 Wiring diagram for pulse output
This is impossible.
External power supply
12 to 24V DC (30V DC max.)
100mA max.
P
P
Protective diode
Load