User Manual
Page 17 of 40
Step 5
Unplug the HomePlugAVs and then connect them to your Ethernet devices using
the Ethernet cables from the product package. After connecting the Ethernet cable,
plug the HomePlugs directly to the preferred room’s power outlet.
An Ethernet-enabled device can be a router, computer, hub, gaming console, IP
phone, network printer, or IP TV set-top box.
Note: HomePlugAVs work best when connected directly to a power outlet. It is
suggested to avoid plugging a HomePlugAV to a power strip or power extension as
much as possible. Other electrical devices plugged in the power strip produce
electrical noise that may affect the overall performance of the HomePlug.
To Next Page
Loading...
Need help?
General
