Aztech HL117EW User Manual

User Manual
Page 25 of 40
Using the Web User Interface
Web User Interface will allow you to configure HomePlugAV with WiFi. It is mainly
used for Wireless Configuration, Changing the Private Network Name, detecting
other HomePlugAV’s in the network, and measuring the throughput of devices.
Installation is straightforward and the user interface is easy to use.
Note: To use the Web User Interface, you need a computer using a Windows or MAC
operating system. The Web interface works with various web browsers such as
Internet Explorer, Firefox, Safari, and Google Chrome.
Requirements
To ensure the smooth run of the Web User Interface, it is suggested that your
computer must be able to meet the following requirements:
 Windows XP (32 and 64 bit), Vista (32 and 64 bit), Windows 8 (32 and 64 bit)
 300 MHz Processor
 128 Mb of RAM
 .NET Framework
 Windows Installer 3.1 for Windows XP (32 and 64 bit)
 Network Interface Card
 128 Mb of free hard disk space

Aztech HL117EW Specifications

General

Brand	Aztech
Model	HL117EW
Category	Extender
Language	English