User Manual
Page 28 of 40
Remote Device Information. Displays information about remote
HomePlugAV’s detected in the network. Only HomePlugAVs using the
same Private Network Name as the local HomePlugAV will appear in
the Remote Devices list. The Remote Device Information displays the
following information:
Device MAC Address. Displays the Remote HomePlugAV MAC
Address.
Connection Rate (Tx/Rx). Displays the Transmit and Receive
connection rate for each active HomePlugAV device.
TEI. Displays the Terminal Equipment Identifier.
Network Tab
WLAN Setting. Allows you to configure the wireless properties of both the
2.4Ghz and 5.0GHz frequency bands of your device.
Radio Settings
a. Modify the mode, or change the wireless standard implemented in
your HomePlugAV.
To Next Page
Loading...
Need help?
General
