User Manual
Page 26 of 40
How to access the Web User Interface?
Web User Interface will allow you to configure HomePlugAV with WiFi. It is mainly
used for Wireless Configuration, Changing the Private Network Name, detecting
other HomePlugAV’s in the network, and measuring the throughput of devices.
Installation is straightforward and the user interface is easy to use.
1. Ensure to follow the connection set up below.
2. Connect an Ethernet cable from the Desktop/PC to any of the Ethernet
ports of the HL117EW.
3. On your computer, turn OFF Wireless Adapater (if applicable).
4. Open and launch a Web Browser.
5. Type in 10.0.10.254 on the Web Browser’s URL Link then hit the enter key.
6. Enter ‘admin’ as Username and ‘admin’ as Password. Then click Login.
7. You will now be directed to the Web User Interface page.
To Next Page
Loading...
Need help?
General
