User Manual
Page 5 of 40
The HomePlugAV from a Single Pack on the other hand, uses a random Private
Network Name. You still need to change its Private Network Name to allow it to
communicate with an existing HomePlugAV network.
When a HomePlugAV communicates with another device, the Powerline Activity
LED color will indicate the status of the connection rate it provides: Red means
below 30 Mbps; Amber means 30 to 80 Mbps; and Green means more than 80
Mbps.
Direct Connection
For best performance, connect the HomePlugAV directly to a wall outlet. As much
as possible, avoid connecting it to a power strip where other electrical devices are
connected. Other devices may produce electrical noise or interferences that may
affect the overall performance of your HomePlugAV network.
To Next Page
Loading...
Need help?
General
