User Manual
Page 35 of 40
To change the Private Network Name
Private Network Name provides the function to manually change the Private
Network Name of local and remote HomePlugAVs. A Private Network Name is a
string of 8 to 64 characters enables HomePlugAV devices to communicate with
each other.
If you intend to create multiple networks, you can assign different Private Network
Names among your devices. However, make sure that at least two HomePlugAVs
have a similar Private Network Name. A HomePlugAV that uses a unique or random
Private Network Name will not be able to communicate with other devices under a
different Private Network name.
NOTE : The Private Network Name is the Network Password.
Note: In case you cannot connect into the network after changing the Private
Network Name, please power cycle the device. To power cycle, disconnect and
then reconnect HomePlugAV from the power outlet.
Local Private Network Name
Local Private Network Name refers to the Private Network Name of the HomePlugAV
directly connected to the computer where you use the Web User Interface.
To change the local Private Network Name:
1. Access the Web User Interface.
2. Click HomePlug, then choose Security.
3. Type the new Private Network Name. This field is case sensitive. It accepts 8 to
64 alphanumeric characters including punctuation marks but no spaces.
4. Click Apply. When the process is complete, the message Settings Applied
appears.
To Next Page
Loading...
Need help?
General
