User Manual
Page 33 of 40
Firmware Upgrade. Allows you to upgrade the firmware of HomePlugAV.
After upgrading the firmware, HomePlugAV will still retain the same Private
Network Name and MAC address settings. Before you proceed with the
upgrade, you need to have the Firmware File (FWUpgrade). You can
download upgrade files from the product’s Web site.
1. Go to Management > Device Management > Upgrade Firmware.
2. Click Browse, then select the Firmware File (fwupgrade file), and click
Start Upgrade.
Firmware Upgrade will take about 3-5 minutes to complete.
NOTE : After Firmware Upgrade, please Restore to Factory Default
Settings. In addition, ONLY USE OFFICIALLY RELEASE AZTECH FIRMWARE.
These can be downloaded from the Aztech Support Site
(www.Aztech.com/support).
To Next Page
Loading...
Need help?
General
