User Manual
Page 38 of 68
be modified. Usually, you do not need to change it.
After completing the setup, click the Apply button to make the settings take effect.
Dynamic IP (DHCP)
If you select the Dynamic IP (DHCP) as the Internet connection type, the wireless
router will automatically acquire the IP address, subnet mask, gateway and so on.
When the ISP does not provide you any information, please select this connection
type.
Disable NAT: Enable or disable the NAT function.
Internet Connection: Select the Dynamic IP (DHCP).
Hostname: Set the hostname.
MAC Address: Enter the MAC address of the host that accesses the Internet via
the wireless router. Some ISPs requires you to enter the MAC address. After
entering the MAC address, only the host with the corresponding MAC is allowed to
access the Internet via the wireless router.
MAC Clone: After clicking this button, the MAC address of the host that is
To Next Page
Loading...
Need help?
General
