User Manual
Page 39 of 68
managing the Web page will be copied to the MAC Address field.
Primary DNS: Enter the primary DNS address provided by your ISP.
Secondary DNS: Enter the secondary DNS address provided by your ISP.
MTU: Set the MTU value. You may consult your ISP whether this value needs to
be modified. Usually, you do not need to change it.
After finishing setting, click the Apply button to make the settings take effect.
Dynamic IP+ (DHCP+)
If you select the Dynamic IP+ (DHCP+) type, after entering the username and the
password provided by your ISP, the wireless router will automatically acquire the
IP address, subnet mask, gateway and so on.
Disable NAT: Enable or disable the NAT function.
Internet Connection: Select the Dynamic IP+ (DHCP+).
Hostname: Set the host name.
MAC Address: Enter the MAC address of the host that accesses the Internet via
To Next Page
Loading...
Need help?
General
