B2 HVA28TD - Interrupting a Test Sequence

5 Test Procedure
36 DHV0053 b2 EN
© b2electronic gmbh
Running an Automatic Test - Detailed Steps
Steps AR1 - AR8 describe how to run a test in the Automatic Mode.
Step Procedure (Run Automatic Test )
AR1:Use Last Seq. or Start New Test
Select “Start Test”
AR2: Chose Test
To repeat the previous test sequence:
• Select “Last Used Sequence” from
“Main Menu”
• Proceed to Step AR 4
Otherwise, select:
• “Start Sequence”
AR3: Sequence
Select one of the Sequences
AR4: Sequence
All information about the chosen
sequence are displayed.