5 Test Procedure
© b2electronic gmbh
DHV0053 b2 EN
Step Procedure (Run Automatic Test )
AR5: HV Activation
Once the activation screen appears,
• Press the HV switch (6) within 10
seconds.
If the HV switch is not activated within the
10 second window, the “Start Auto Test
Seq. “screen will reappear.
AR6: Test Start up
“Startup” appears on the screen to
indicate that the HVA is initializing test
AR7: Test
Test begins automatically
The bottom of the screen indicates the
lapsed time
T: lapsed time / total test duration
AR8: Test End
Display indicates end of Auto Test
If reporting is active, the user can
immediately view the report.
To Next Page
Loading...
