BAC FXV - PCD Hood Assembly (Optional)

WWW.BALTIMOREAIRCOIL.COM
14
PCD Hood Assembly (Optional)
TheFXV’sinnovativedesignresultsinalowheatlosswhentheunitisidle.When
additionalheatlossreductionisdesired,coilairintakehoodswithfactorymountedPCDs
withstainlesssteellinkagesanddamperactuatorscanbeprovided.Themotoractuators
areeasilyaccessible.Theadditionofoptionalfactorymountedinsulationtothehoodand
casingcanfurtherreducetheheatlossbyminimizinglossesduetoconduction.
1. LowerthePCDhoodintoplacewiththeaccessdooronthelouverfaceoftheunit.
2. Applyfoamtape(BACpart#270567)tothebottomedgeofthePCDhood.Attach
thePCDhoodalongthefrontandbackusinghardwareprovided.
Lifting Ear (4)
PCD Access Door
PCD Hood Front
PCD Hood Back
Louver Face
Figure 21. PCD Hood Assembly (FXV-0806 Shown)