Need help?Do you have a question about the BAC FXV and is the answer not in the manual?
General| Brand | BAC |
|---|---|
| Model | FXV |
| Category | Accessories |
| Language | English |
Provides essential precautions for installation and location to safeguard equipment, premises, and the public.
Details factory assembly and shipping configurations for single and dual air intake models.
Instructions to check received items and identify shipping damage before signing the bill of lading.
Guidance on verifying section weights from certified drawings, including accessories, for rigging.
Details on mounting holes, leveling requirements, and IBC rating considerations for unit anchoring.
Measures to protect products against damage and reduced effectiveness in below freezing ambient conditions.
Guidelines for ensuring adequate fresh air supply and preventing discharge air recirculation.
Reference to the Limitation of Warranties applicable at the time of sale or purchase.
Instructions to refer to the Operation & Maintenance Manual for start-up and operational procedures.
Procedures and specifications for rigging, including spreader bar length and vertical dimensions.
Step-by-step instructions for assembling the lower and upper sections of two-piece coil cells.
Procedures for lifting and assembling lower, plenum, and coil sections of optional three-piece units.
Instructions for assembling four-piece cells for dual air intake FXV3 and CXVT units.
Details for installing the optional ENDURADRIVE® Fan System variable frequency drive (VFD).
Overview of optional accessories available for FXV and CXVB single air intake units.
Instructions for installing the optional motor davit assembly to facilitate motor replacement.
Installation guide for the optional PCD hood, enhancing heat loss reduction and performance.
Installation of the discharge sound attenuation assembly for FXV units to reduce operational noise.
Installation of the intake sound attenuation module for FXV units to reduce operational noise.
Instructions for installing optional external service platforms to provide safe unit access.
Guidance on assembling and attaching the external service ladder to the unit structure.
Instructions for reassembling and securely bolting the ladder safety cage to the ladder.
Procedures for installing an internal ladder and upper service platform with handrails.
Steps for placing, securing, and relocating the internal ladder within the unit.
Installation of the door platform, including hangers, clamps, and related attachments.
To Next Page
