BAC FXV - Discharge Sound Attenuation Assembly (FXV Only) (Optional)

WWW.BALTIMOREAIRCOIL.COM
15
Optional Accessories
PCD Hood Assembly
Discharge Sound Attenuation
Assembly (FXV Only)
Discharge Sound Attenuation Assembly (FXV Only) (Optional)
1. VerifyclipsarefactoryinstalledasshowninFigure 22andTable 4.
2.
Lowerattenuatorintoplaceandfastenusingprovidedhardware
andattenuatorclips.
A
B
C
D
E
F
Figure 22. Position of Discharge Sound Attenuation Clips
Model Number Position
FXV-0806, FXV-0809
A, B, E, and F
FXV-0812, FXV-0818,
FXV-1212, FXV-1218
A, B, C, D, E,
and F
Table 4. Position of Discharge Sound Attenuation Clips
NOTE: Discharge sound attenuation
clip position is unaffected by the
unit configuration.
NOTE: For extremely sound sensitive
installations, factory designed,
tested and rated sound attenuation
is available for both the air intake
and discharge. On single air intake
models the thermal performance
with intake or discharge sound
attenuation is certified in
accordance with CTI Standard
STD-201.
Figure 23. Discharge Sound Attenuation Installed
(FXV-1212 Shown)
Discharge
Sound
Attenuation