BAC FXV - Page 2

Crossflow coil products should be rigged and
assembled as outlined in this bulletin.
Theseproceduresshouldbethoroughlyreviewedpriortothe
actualriggingandassemblyoftheequipmenttoacquaint
allpersonnelwithprocedurestobefollowedandtoensure
thatallnecessaryequipmentwillbeavailablebeforehand.
Ifoutstandingcircumstancesrequireadeparturefromthe
proceduresoutlinedinthismanual,contactyourlocalBAC
Representativeforguidance.
Be sure to have a copy of the certified drawings available for reference. If you
do not have a copy of these drawings, or if you need additional information
about this unit, contact your local BAC Representative whose name and
telephone number are on a label adjacent to the access door. The model
number and serial number of the unit are also located in this area.