WWW.BALTIMOREAIRCOIL.COM
45
Unit Operation
EcoFlex™ Controls
Maintenance
Forced Overnight Dry Mode
Software Verification for a
pCO Controller
Retrieval of Logged Data
2. When the download is finished remove the USB flash drive and connect to a computer
– After selecting download logs, the program creates a folder called “CPY00_01” as
well as a datalog file called “LOGS.DWL”. The datalog file will be converted using
the pCO Manager software.
– Already installed on the BAC USB flash drive, the pCO Manager software is used for
data conversion on the computer.”
3. Once the USB flashdrive is installed on to the computer, start the pCO Manager
software and click on the LogEditor module icon.
Figure 40. Datalog Information in BAC_Frequency.csv File
Figure 39. USB Log
4. Click on USB log.
5. Using the browse button, select the file LOGS.DWL contained in the USB flash drive.
6. After the data is successfully converted, go to the USB flash drive’s directory and
open the LOG00_01 folder. The datalog information will be contained in the BAC_
Frequency.csv file.
Figure 38. LogEditor Module
NOTE: Refer to page 28 for
more information on EcoFlex™
Controls Operation and refer to
the EcoFlex™ Controls Appendix
on page 46 for details on menu
navigation.
To Next Page
Loading...
