PCA
4.8 Fuel Selection Screen
«NATGAS FUEL
OIL #2 KEROSENE
OIL #4 PROPANE
OIL #6 COAL
Operation
This screen is displayed by pressing the
MENU
key from the Combustion
Test Screen, and is used to select the fuel being burned.
To select a fuel, first use
the
st
keys
to move the cursor (
z
) in front of the
desired fuel, and then press the
ENTER
key.
NOTE:
The fuel selected is saved as the default, and re-
mains in memory after the PCA is turned off.
The fuel codes as displayed in the Combustion Test Screen:
NG = Natural Gas
KER
=
Kerosene
O#2= Oil #2
LPG
=
Propane
O#4= Oil #4
COL
=
Coal
O#6= Oil #6
Front Panel Key Functions:
–
Move cursor
(
z
) up
–
Move cursor
(
z
) down
–
Select Fuel
–
Go to Combustion Test Screen
– Go to
Draft Screen for PCAs with a pressure sensor, or the
Memory Directory Screen for PCAs without a pressure
sensor
Instruction 0024-9219
4-11
To Next Page
Loading...
