This document is an owner's manual for the Conley 10' x 10' Gazebo with Awning and Bar, model number CON-1010-21 and SKU number 272-1939. It provides detailed assembly instructions, a parts list, and information on care, maintenance, and warranty.
Function Description:
The Conley 10' x 10' Gazebo is designed as a permanent outdoor fixture, offering shade and a functional bar area. It features a main roof canopy, an upper roof vent canopy, and an integrated awning with a bar. The gazebo provides a sheltered space for outdoor activities, with the awning and bar adding versatility for entertaining or relaxation. The design emphasizes stability, requiring the frame to be used as a permanent fixture.
Important Technical Specifications:
- Dimensions: 10' x 10' (Gazebo footprint). Gazebo dimensions are measured from the end of the corner post base covers.
- Components:
- Roof Structure: Main Roof Connector (A), Upper Roof Connector (A1), Upper Roof Support (A2), Finial (A3), Main Roof Corner Support (B), Main Roof Corner Support Extension (B1), Main Roof Side Support (C).
- Frame Structure: Cross Beam (D, D1, D2, D3), Corner Post (E, E1, E2).
- Connectors: U-Shaped Connector (F), Cross Beam Corner Plate (F1), Cross Beam Center Connector Plate (G).
- Awning and Bar: Bar Shelf (H), Bar Support Stand (H1), Bar Connector (H2), Awning Frame - Left Side (I), Awning Frame - Right Side (I1), Awning Corner Connector (I2), Awning Frame - Left (Front and Back) (J), Awning Frame - Right (Front and Back) (J1), Awning Frame – Center (K), Awning Hydrolic Rod (L), Awning Lock (M).
- Base & Covers: Base Plate (N), Base Cover (O).
- Canopies: Main Roof Canopy (P), Upper Roof Vent Canopy (P1), Awning Canopy (Q).
- Hardware:
- M6 x 15 mm Bolt with Washer (R) - Qty: 112
- M6 x 32 mm Bolt with Nut and Washers (S) - Qty: 8
- M6 x 50 mm Bolt with Nut and Washers (T) - Qty: 2
- M6 x 15mm Bolt with Washer (U) - Qty: 8
- Tools Provided: M6 Hex Wrench (V) - Qty: 2, Allen Wrench (W) - Qty: 1.
- Anchoring: Ground Stake (X) - Qty: 16.
- Accessory: Accessory Hook (Y) - Qty: 1.
Usage Features:
- Integrated Awning and Bar: The gazebo includes an awning that can be extended or retracted, and a bar shelf with support stands, providing a convenient area for serving or dining. The awning is secured in the closed position using an Awning Lock (M).
- Permanent Fixture Design: The gazebo frame is intended for permanent installation, suggesting a robust and stable structure.
- Removable Canopies: The main canopy and awning should be removed when not in use or during high winds, rain, or snow to prevent damage.
- Accessory Hook: An accessory hook (Y) is included, screwing into the Main Roof Connector (A), for hanging items.
- Anchoring: The gazebo is secured to the ground using Ground Stakes (X) inserted through the Base Plates (N) at each corner.
- Hydraulic Rods: Awning Hydrolic Rods (L) facilitate the smooth operation of the awning.
Maintenance Features:
- Frame Care:
- Clean frames with a mild soap and warm water.
- Avoid abrasive materials, cleaners, or bleach.
- Rinse with clean water and dry thoroughly.
- Clean, drain, and dry thoroughly before storing for the winter.
- Fabric Care (Main Roof Canopy, Upper Roof Vent Canopy, Awning Canopy):
- Clean by hand with a mild solution of soap and water.
- Rinse canopies thoroughly and allow to drip dry.
- Do not machine wash or tumble dry, as canopies may shrink.
- Do not use bleach or solvents on canopies.
- Remove canopies when not in use or during hazardous weather conditions (wind, rain, snow).
- Warranty:
- Frame: Warranted against rusting for 1 year.
- Finish: Warranted against peeling, cracking, or blistering for 1 year, provided the product has not been scratched or abraded.
- Fabric: Main roof canopy, upper roof vent canopy, and awning canopy are covered by a 1-year warranty against manufacturing defects.
- Exclusions: Commercial use, acts of nature, vandalism, misuse, improper assembly, discoloration/fading from chemicals/spills/pool water/salt water, mildew, corrosion, and rusting of frames/hardware are not covered.
- Claim Process: Purchaser must contact the manufacturer's customer service department with proof of purchase (dated register receipt). Defective parts will be repaired or replaced at the manufacturer's option. Customer is responsible for freight and packaging charges to and from the service center. Warranty is non-transferable. Replacement items will be in the original style/color or similar if unavailable.
To Next Page
Need help?
General
