5
-
22
STOPPING
1. Stop the tractor with the brake
pedal.
2. Put the main shift lever to the neu-
tral position.
3. Put the shuttle lever to the neutral
position.
4. Put all SCV levers to the neutral
position.
5. Set the PTO switch in the OFF po-
sition.
6. Lower all implements on the
ground.
7. Push the hand throttle lever back
slowly to decelerate the engine
and keep the engine for 1 - 2 min-
utes of unloaded idling.
8. Make sure the parking brake is
applied.
9. Turn the main switch to the
「
OFF
」
position to stop the en-
gine.
CAUTION
•
When leaving the tractor, put
the shuttle lever into the neu-
tral position. If not, the trac-
tor may move even though the
engine is stopped.
IMPORTANT
•
The tractor needs to be sta-
tionary before making a shift.
If the parking brake is applied
while the tractor is moving,
the transmission can be dam-
aged.
•
Each part of the engine is
cooled down by the engine oil.
If the hot engine is suddenly
stopped, its high temperature
or insufficient lubricant can
cause damage to the related
parts.
CAUTION
•
Remove the ignition key be-
fore leaving the tractor to pre-
vent its use by an unqualied
person.
2024h_3026h.indb 222024h_3026h.indb 22 2020-09-18 오후 6:17:272020-09-18 오후 6:17:27