5
-
24
1. This position control lever can be
used to lower and lift an imple-
ment freely.
2. Pulling the lever back lifts the im-
plement while pushing it forward
lowers the implement.
CAUTION
•
To avoid a personal injury, use
the position control lever when
attaching/detaching the imple-
ment.
TO RAISE OR LOWER THE
IMPLEMENT
ADJUSTING THE LOWERING SPEED OF THE IMPLEMENT
•
Do not work under or put a
foot under the implement.
[Otherwise]
The implement may fall and
cause an injury.
WARNING
For adjusting the lowering speed,
turn
valve (A) to the left for faster
movement or (B) to the right for slow-
er movement. Turning the valve fully
to the right (B) will block the hydrau-
lic pressure and will cause the imple-
ment to stop.
(1) Flow Control Valve
(A) Fast (B) Slow
(1) Position Control Lever
(A) Lowering (B) Lifting
2024h_3026h.indb 242024h_3026h.indb 24 2020-09-18 오후 6:17:272020-09-18 오후 6:17:27