Need help?Do you have a question about the Bad Boy RENEGADE Series and is the answer not in the manual?
General| Spindle Material | Cast Iron |
|---|---|
| Horsepower | 37 HP |
| Cutting Width | 72 inches |
| Transmission | Hydro-Gear ZT-4400 |
| Cutting Height | 1.5 - 5 inches |
Procedure for validating your mower's warranty within 30 days of purchase.
Locating your mower's VIN and serial numbers for service and parts.
Information on using genuine Bad Boy parts and obtaining authorized service.
Essential safety precautions for operating the mower safely.
Guidelines for safely operating the mower on inclines and declines.
Warnings and procedures to prevent accidents involving children.
Step-by-step instructions for starting and maneuvering the mower.
Guidance on safe practices when operating on inclines and declines.
A chart outlining maintenance tasks and their recommended intervals.
Guidelines for safely storing and transporting the mower.
Q&A format addressing common mower problems and their fixes.
Description of the ignition, throttle, levers, and other control functions.
Instructions on how to safely move the mower when it is not operational.
Explains the function of various gauges and warning lights on the mower.
Guidance on checking, sharpening, and maintaining mower blades.
Details on lubrication points and recommended intervals for the mower.
Explains the two basic types of mowing blades and their uses.
Advice on mowing techniques, grass cutting, and blade care.
Information on the benefits and considerations of bagging vs. mulching.
Procedures for changing hydraulic oil and filters.
Steps to purge air from the hydrostatic drive system.
Information on the mower's two-belt drive system and tensioners.
Step-by-step guide for changing engine oil and filter.
Procedure for replacing the fuel filter assembly.
Instructions for inspecting and cleaning the air cleaner elements.
How to clean the radiator debris screen for optimal cooling.
Checking the coolant level in the expansion tank.
Overview of fuses, relays, and wiring for the mower's electrical system.
Schematic illustrating the mower's electrical wiring connections.
Details on torquing lug nuts and greasing frame components.
Steps for removing and reinstalling the cutting deck belt.
Procedure for ensuring the deck is properly leveled for optimal cutting.
How to adjust the deck spring tension for proper belt performance.
Steps for removing blades and recommendations for sharpening.
Detailed list of parts for the 61-inch cutting deck assembly.
Detailed list of parts for the front end of the mower.
Parts list for the control arm assemblies and related components.
Detailed parts list for components located in the engine bay.
Decals for control panel functions, safety warnings, and branding.
Decals for engine type, hydraulic systems, and branding elements.
Details on what the warranty covers, for how long, and what it excludes.
Steps for customers to follow to obtain service under the warranty.
Legal limitations and disclaimers related to the product warranty.
To Next Page
