Badger Meter MN Series - Housing Dimensions; Hardware Installation

Installation
Page 14 AC_F110_BA_02_1346 November 2014
7.3 Housing dimensions
Standard IP65 (NEMA 4) ABS housing
7.4 Hardware installation
ELECTROSTATIC DISCHARGE DOES INFLICT IRREPARABLE DAMAGE TO ELECTRONICS! BEFORE
INSTALLING OR OPENING THE UNIT, THE INSTALLER HAS TO DISCHARGE HIMSELF BY TOUCHING
A WELL GROUNDED OBJECT.
THIS UNIT MUST BE INSTALLED IN ACCORDANCE WITH THE EMC GUIDELINES
(ELECTROMAGNETIC COMPATIBILITY).
DO GROUND THE ALUMINIUM CASING PROPERLY (OPTION HA / HU) AS INDICATED, IF THE F110
HAS BEEN SUPPLIED WITH THE 115-230 VAC POWER SUPPLY OPTION.
THE GREEN / YELLOW WIRE BETWEEN THE BACK CASING AND REMOVABLE TERMINAL BLOCK
MUST NEVER BE REMOVED.
Grounding Aluminium enclosure with option PM 115-230V AC
Front view
panel cut-out
bottom view
Side view
(panel mount)