ORI-AS-00036-EN-06
Destination Settings
Field Description for ORION SE Gateway Description for GALAXY Gateway
Backhaul Type CDMA CDMA
Destination IP Customer-supplied Internet Protocol (IP)
address used to identify the gateway.
Customer-supplied Internet Protocol (IP)
address used to identify the gateway.
Destination Port Customer-supplied port destination setting.
The default setting is 5004.
Customer-supplied port destination setting.
The default setting is 5003.
Connection Int. (s) Customer-supplied connection interval
setting which defines how often the gateway
connects to the reading data management
system. The default setting depends on the
firmware version.
Read only field. Connection interval setting
which defines how often the gateway connects
to the reading data management system. The
setting depends on the firmware version.
Keep-Alive Int. (m) Customer-supplied setting which defines
how often the gateway sends a message to
the reading data management system to stay
connected. The default setting is 9 minutes.
Read only field. Setting which defines how often
the gateway sends a message to the reading
data management system to stay connected.
The setting is 9 minutes.
Gateway IP Settings
Field Description for ORION SE and GALAXY Gateways
DHCP Enabled Field automatically fills with information from the network. (Applicable for LAN only.)
IP Address n/a for CDMA
Subnet Mask n/a for CDMA
Gateway Address n/a for CDMA
Backhaul Identification
Field Description for ORION SE and GALAXY Gateways
Version Read only field. Fills with the CDMA backhaul version number.
Module ID(s) Read only field. Fills with the ESN (Electronic Serial Number) of the backhaul cellular modem.
The Reload button refreshes the information in the fields.
Using the Software
Page 18 April 2015
To Next Page
Loading...
Need help?
General