Badger Meter ORION Fixed Network SE - Gateway Identification - Orion Se; Set the Utility Passkey

ORI-AS-00036-EN-06
GATEWAY IDENTIFICATION  ORION SE
OTE:N This screen applies to ORION SE gateways ONLY.
From the left-hand menu, select Identification to display the gateway Identification screen. The Identification screen holds
the security information for the gateway and is used to set the passkey for the ORION SE gateway.
Figure 22: Identification screen
New Utility Passkey The customer-defined encrypted code (8…32 characters) used for gateway protection.
Passkey Strength Indicates the protective “strength” of the passkey. A strong passkey is recommended.
Confirm Passkey The encrypted code is repeated in this field to confirm the correct passkey for the gateway.
Set the Utility Passkey
1. Key the passkey in the New Utility Passkey eld. The strength of the passkey will display in the Passkey Strength eld.
2. Key the passkey again in the Conrm Passkey eld.
3. Click Save to set the passkey.
OTE:N Click Clear to remove information from the passkey fields.
Gateway Identication - ORION SE
Page 25 April 2015