ORI-AS-00036-EN-06
WiFi Configuration Screen
OTE:N This screen is for ORION SE gateways.
The WiFi Configuration screen displays when Network is selected and the gateway uses an external, customer-supplied WiFi
backhaul connection. The screen shown in Figure 21 is an example of the WiFi Configuration screen filled with sample data.
Figure 21: WiFi Configuration screen
Changing Configuration Settings
The WiFi Configuration screen is divided into four sections:
• Destination Settings
• Gateway IP Settings
• WiFi Settings
• Backhaul Identification
Fields in the Destination, Gateway IP and WiFi Settings sections are programmable. If you make a change, the Save button
becomes available.
Click Save to save any changes in the section.
Click Reload to restore the current configuration settings.
OTE:N Reload can only restore current configuration if changes have not been saved.
Fields in the Backhaul Identification section will fill based on information from the gateway. This section is read only.
Using the Software
Page 23 April 2015
To Next Page
Loading...
Need help?
General