26
CUSTOMER MANUAL FRONT HUB MOTOR SYSTEM
7.6.4 Error Code Indication
If there are errors pertaining to the electronic
control system, the error code will appear
automatically.
Error Code Indication
If an error code appears, take the Pedelec to a
Service Center. Do not ride it until the Pedelec
has been serviced.
7.6.5 Error Code Review
• The system can store a maximum of 10 error
codes out of 20 available error codes
• To check the information, press the UP or
DOWN button to review all the Error Codes.
• To exit the Advanced Settings, press the
MODE button to return to the Unit Conver-
sion between miles and kilometers.
• To clear the Error Code, hold the UP, DOWN and
MODE buttons simultaneously for 2 seconds.
Error Code Memory Interface
7.6.6 Exit settings
• When in Settings, press the MODE button to
confirm input.
• Hold the MODE button to save your settings,
then exit the current settings.
• Hold the DOWN button to cancel the opera-
tion and discard your settings, then return to
the previous menu.
• After 1 minute without use, the display will
exit the settings automatically.
To Next Page
Loading...
