BAFANG BT C01.340.UART - Managing C18.UART Password

35
DP C18.UART
CUSTOMER MANUAL FRONT HUB MOTOR SYSTEM
After setting the passwrod, the interface exit back automatically to original interface within two
seconds. Briefly press for two times (interval time is less than 0.5S) to exit back to main interface
or select “BACK” → “EXIT” to exit back to main interface.
Reset password:
After setting the password, the interface “Password” will add option “Reset Password”. Briefly press
(<0.5S)
or to select “Reset Password”, and then briefly press (<0.5S) . This time it prompt
input current password in the interface. If inputing worng password for ten tiems, the display will
turn off automatically. When inputing right password, it prompt input new passwrod in the interface.
The following step is same with starting password. After changing the password, it will exit auto-
matically back to the original interface within two seconds.
Briefly press for
two times (interval time is less than 0.5S) to exit back to the main interface or
select “BACK” → “EXIT” to exit back to main interface.