8.11
Password/Speed limit set : The location of speed display symbol PSd, remind to
input p
asswords, press UP/DOWN buttons to setup password value (0~9), press
LEFT/RIGHT
buttons to switch the password item, password is 4 digits, the default
p
assword is "1919". Press POWER button when password adjustment is completed.
Display will return to the V
oltage set item if the password is incorrect. Correct password
will enter the Speed limit set item.
8.12
Speed limit set : The location of speed display symbol SPL, the location of
mileage dis
play speed limit value, the default value is 25km/h. Press UP/DOWN
buttons to a
djust the speed limit value, speed limit value can be adjust from 10 to
45km/h. Pre
ss POWER button to confirm when you finish the adjustment.
T
he maximum speed is restrict by the motor and controller, probably can’t reach the set value.
9 Maint
ain reminded
(This function is optional)
The display
can remind maintain information， according to mileage（ODO） and battery
cycle times.
To Next Page
Loading...
