BAFANG C965 - Error Code Reference

9.1 Display will display symbol MAINT
AIN when the ODO accumulated more than
setting mileage (this parameter can be set by dealers), the mileage symbol will flash for
4 seconds when the display power on, the buzzer beep for 2 seconds at the same time.
9.2 Display will
display symbol MAINTAIN When the battery cycle over setting times,
the symbol of battery will flash for 4 seconds when the display power on, the buzzer
beep for 2 seconds at the same time.
You can shutdown maintain reminding message by parameter setting. Parameter setting
->Maintain reminded（MA）->0
10
Error Code define
800U can gi
ve warning when E-bike has error, LCD display error icon and error code in
speed position, Error code from 01H~30H, definition see the table below.
Error Co
de
Error descrip
tion
Error display
0x01
Normal No error
0x03
Brake signal No error
0x04
Throttle on high position
Beep for 1 second, display 04H on speed position
0x05
Throttle error
Beep for 1 second, display 05H on speed position
0x06
Low voltage protection
Beep for 1 second, display 06H on speed position
0x07
High voltage protection
Beep for 1 second, display 07H on speed position
0x08
Line of the Hall on motor error
Beep for 1 second, display 08H on speed position
0x09
Phase line of the motor error
Beep for 1 second, display 09H on speed position
0x10
High temperature of controller
Beep for 1 second, display 10H on speed position
0x11
Controller’s temperature
sensor error
Beep for 1 second, display 11H on speed position
0x12
Current sensor error
Beep for 1 second, display 12H on speed position
0x13
Battery’s temperature sensor
error
Beep for 1 second, display 13H on speed position
0x14
Motor‘s temperature sensor
Beep for 1 second, display 14H on speed position
14