BAFANG DP C15.UART - Normal Indication Area

5
DISPLAY MANUAL DP C15.UART
NORMAL INDICATION AREA
1
2
3
4
5
6
7
1
Up
2
ON/OFF/Mode
3
Down
4
Intelligent battery capacity indication
5
Real-time speed indication
6
Multiple function indication area
7
Power assistance level indication
• Real-time speed indication: Indicate real-
time speed unit km/h or MPH.
• Intelligent battery capacity indication: Show
the percentage of remaining battery capacity
which accounts for total battery capacity.
• Multiply function indication: It consists of
single-trip distance TRIP, total distance ODO,
remaining distance RANGE, output power
POWER, energy consumption Cal, riding
time TIME. (Note: Within ten seconds, the
display will detect the pedal sensor type, if
torque sensor, then the display will show
the interface of the calorie, if display get
remaining range data, the display will show
the interface of the remaining distance,
otherwise the display will not show the two
interface)
• Assistance level indication: Indicate the cur-
rent level from level 1~ level 5, If no number
is displayed, it means no power assistance.
NORMAL INDICATION AREA