7
DISPLAY MANUAL DP C15.UART
• Multiple functions interface
After starting up, the default interface is
“TRIP” (single trip distance). Press "Mode"
briefly circularly, it can circularly switch as
“TRIP” (single trip distance) → “ODO”(total
distance) → “MAX”(maximum riding
speed) → “AVG”(average riding speed) →
“RANGE”(remaining distance) → “CALO-
RIES/CAL”(KCal) → “TIME”(riding time) →
“POWER”(output power) → “TRIP”(single trip
distance).
• Error code indication
When the failure occurs, the display will
show the error code and the display will
flicker at the same time. See the detailed
definition shown in the table of the Annex1.
Only when the failure is solved, it can exit
the error code interface. When failure hap-
pens, the rider shall stop riding immediately.
(The interface: error code)
BUTTON DEFINITION
To Next Page
Loading...
