7
DISPLAY MANUAL DP C18.UART
BUTTON DEFINITION
ON/OFF
Level "+"
Level "-"
Mode
Headlight
NORMAL OPERATION
• On/off switch
Turn on the power, press and hold (>2S)
to power on the display, the display begin
to operate. Press and hold (>2S) again
to power off the display. If the bike is not
used, after 5 minutes (time can be set in
“Auto Off”) the display will be automatically
turned off. If the password function of the
display is activated, need to input the correct
password to enter into the normal display
interface.
• Power assistance level select
In the manual gearshift mode, briefly press
(<0.5S) or to switch the level to
change the assistance power, The lowest
level is Level 0, the highest Level 5. When
the display is on, the default mode is Level
1,“0”means no power assistance.
BUTTON DEFINITION
To Next Page
Loading...
