BAFANG DP E10.CAN - Page 29

28
BF-DM-C-DP C15-EN November 2019
7.7.2.6 Torque Information
Press the
or button (<0.5S) to
highlight “Torque Info”, then press the
button (<0.5S) to confirm. Now press the
or button (<0.5S) to view "Hard-
ware Ver" or "Software Ver".
To return, press the
button (<0.5S) to
exit back to the "Information".
NOTE: If your Pedelec has not torque sensor, "--"
is displayed.
7.7.2.7 Error Code
Press the
or button (<0.5S) to
highlight “Error code”, then press the
button (<0.5S) to confirm. Now press the
or button (<0.5S) to view “E-Code0”
to “E-Code9”. It shows information for the
last ten errors of the pedelec. The error code
"00"means that there is no error.
To return, press the
button (<0.5S) to
exit back to the "Information".