EasyManua.ls Logo

Bailey Approach - Page 45

Bailey Approach
104 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
To exit, scroll to “Exit to main menu” and
press .
Contrast (of LCD screen)
Press then to decrease, to
increase. Press to nish.
Beep (Disables sounder)
Press then or to set “on”
or “off”. Press to nish.
Water Low (Warning tone and pop up with
water tank low level)
Press then or to set
“on” or “off”. Press to nish
When level is low the alarm sounds and a
pop up appears. Press to cancel.
Only rearms when level is increased by at
least 25%.
Waste High (Warning tone and pop up with
waste tank high level)
Press then or to set “on
or “off”.
Press to nish
When level is high, alarm sounds and a
pop up appears. Press to cancel.
Only rearms when level is reduced below
50%.
230V Lost (Warning tone and pop up when
230V mains is lost)
Press then or to set “on” or
“off”. Press to nish
When mains voltage is lost, alarm
sounds and a pop up appears.
Press to cancel.
Only rearms after 230V mains has been
restored.
Amps High (Warning tone and pop up when
current draw is high)
Press then or to set “on” or
“off”.
Press to nish
When current drawn from leisure battery
is high (12A), alarm sounds and a pop up
appears.
Press to cancel.
Only rearms when current is reduced below
5A.
Low Volts V (Warning tone and pop up when
vehicle battery is low)
Press then or to set “on” or
“off”. Press to nish
When voltage in vehicle battery is low
(less than 11V), alarm sounds and a pop up
appears.
Press to cancel.
Only rearms when vehicle voltage
is greater than 13V.
Low Volts L (Warning tone and pop up when
leisure battery is low)
Press then or to set “on” or
“off”.
Press to nish
When voltage in Leisure battery is low
(less than 11V), alarm sounds and a pop up
appears.
Press to cancel.
Only rearms if leisure voltage is greater
than 13V.
Charge VBatt (Displays option to charge
vehicle battery when 230V mains is
connected)
Press then or to set “on” or
“off”.
Press to nish
Standby (Set how long the backlight stays on
after the last button is pressed)
Press then to decrease, to
increase. Press to nish.
Auto Battery (When the leisure battery is
low, automatically swap over to the vehicle
battery)
Press then or to set “on” or
“off”.
Press to nish
Firmware (Displays the software version
currently installed)
43
6
FITTED EQUIPMENT- The Control Panel
FITTED EQUIPMENT- The Control Panel

Table of Contents

Other manuals for Bailey Approach

Related product manuals