• The control panel in standby • The control panel in setting menu
Set the required temperature
The temperature can be set from +5°C to
+30°C in steps of 0.5°C. Warm water is always
available (50°C) when the boiler is on and
running on LPG or electricity.
During summer, when only warm water is
required, adjust the temperature setting to
below the surrounding temperature so that the
central heating pump does not start.
• The temperature displayed is the
temperature which is set at present (in this
case 22.0°C).
• Raise the temperature by pressing the +
button. Lower the temperature by pressing
the – button.
• The settings are ready and the central
heating pump will work until the set
temperature is achieved.
49
To Next Page
Loading...
