Extra warm water
If you need more warm water, you can raise the
water temperature temporarily from 50°C to
65°C.
After 30 minutes, the boiler reverts to normal
operation. When you have selected more warm
water the circulation pump stops.
• Increase the quantity of warm water by
pressing the + button.
• The settings are ready.
If you wish to revert to the basic warm water
settings before 30 minutes have expired.
• Reset the warm water by pressing the –
button.
• The settings are ready.
Heating with electricity
Do as follows to active heating with electricity.
The greater the power, the better the heating
performance.
In choosing between electricity and gas,
electricity is given priority.
• Start and step between the various
power steps (Off, 1kW, 2kW or 3kW) with
the + button or – button. The set value is
displayed on the screen. (Certain boilers are
equipped with max 2 kW.)
• The settings are ready and the boiler is
working at set temperature.
• To switch off the electrical operation, step
with the – button to Off.
50
To Next Page
Loading...
