Bajaj Pulsar 135 LS User Manual

General Maintenance Information
16
• Check engine oil level every day before starting the
vehicle.
• Always maintain engine oil level between upper &
lower mark provided on cover RH.
Engine Oil Level Checking :
• Park the vehicle on level surface on center stand.
• Check oil level through oil inspection gauge as shown
in photograph.
• Always maintain engine oil level between the upper
(C) and lower (D) mark provided on Cover RH.
Engine Oil Capacity :
• 1000 ml for refill and 1100 ml on engine overhaul.
Engine Oil
A : Oil Filler
Cap
B : Oil Level
Inspection
Window
A
B
C
D
Bajaj DTS-i SAE 20W50 of API ‘SL’, JASO
10000 MA Grade
Replacement 1st replacement at 750 Kms. / 1st
Frequency* service. Thereafter at every
10,000 Kms.
*For any other branded oil of equivalent grade
replacement frequency will be 5000 Kms.
Bajaj Auto recommends “Bajaj DTS-i 10000” engine oil
for 10,000 kms drain interval, better performance of
engine components & warranty benefits.
CAUTION :
• It is most important to adhere to recommended
grade & frequency of oil change for the purpose
of long life of critical engine components. For
details refer periodic maintenance chart.
• Do not reuse drained oil.
Recommended Oil :
“Bajaj DTS-i 10000” a high performance
engine oil developed by Bajaj auto,
specially formulated for vehicles with DTS-i
engine.

Bajaj Pulsar 135 LS Specifications

General

Engine Type	4-Stroke, DTS-i, Air Cooled, Single Cylinder
Displacement	134.66 cc
Max Power	13.5 PS @ 9000 rpm
Max Torque	11.4 Nm @ 7500 rpm
Transmission	5-speed
Fuel System	Carburetor
Front Brake	240 mm Disc
Rear Brake	130 mm Drum
Fuel Tank Capacity	8 liters
Kerb Weight	122 kg
Gearbox	5-speed
Bore x Stroke	54 mm x 58.8 mm
Compression Ratio	9.8:1
Overall Length	1995 mm
Overall Width	765 mm
Overall Height	1045 mm
Wheelbase	1325 mm
Ground Clearance	165 mm
Front Suspension	Telescopic
Rear Suspension	5-way adjustable, Nitrox shock absorber
Clutch	Wet, Multi Plate
Front Tyre	2.75 x 17
Rear Tyre	100/90 x 17
Starting	Kick and Self Start