EasyManua.ls Logo

Bajaj Pulsar 135 LS - Technical Specifications

Bajaj Pulsar 135 LS
35 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Technical Specifications
2
Engine : 4 stroke DTS-i, Single cylinder
Natural air cooled.
Bore x Stroke : 54.0 mm x 58.8 mm
Eng. Displacement : 134.66 cc
Compression Ratio : 9.8:1
Idling Speed : 1400 rpm
Max. Net Power : 13.5 Ps @ 9000 rpm
Max. Net Torque : 11.4 Nm @ 7500 rpm
Ignition System : DC, Micro controller based digital
CDI with Trics
Spark Plug (2 Nos) : CHAMPION, BOSCH
Spark Plug Gap : 0.6~0.7 mm
Lubrication : Wet sump, Forced.
Transmission : 5 speed constant mesh.
Front Brake : Hydraulic operated 240 mm disc
brake
Rear Brake : Mech. expanding shoe 130 mm
Fuel Tank Capacity :
Full : 8 liters
Reserve : 2.5 liters
Usable : 1.6 liters
Dimensions :
Length : 1995 mm
Width : 765 mm
Height : 1045 mm
Wheel base : 1325 mm
Ground clearance : 170 mm
Tyre Size Front : 2.75 X 17”, 41 P
Rear : 100/90 X 17”, 55 P
2
Tyre Pressure Front : 1.75 kg/cm (25 psi)
2
Rear (Solo) : 2.00 kg/cm (28 psi)
2
Rear (Pillion) : 2.25 kg/cm (32 psi)
Electrical System : 12 Volts DC
Head Lamp : 35/35W
Pilot lamp : 5W (2 nos.)
Neutral : LED
Reserve Indicator : LED
Tail / Stop Lamp : LED
Turn Signal Indicator : LED
Side indicator Lamp : LED
Hi Beam Indi. Lamp : LED
Speedometer Lamp : LED
Fuel Gauge : LED bar display
Horn : 12 V DC 2A
Battery : 12 V 5 Ah MF
Rear No. Plate Lamp : 5W
Vehicle Kerb Weight : 122 kg.
Gross Vehicle Weight : 252 kg.
Max. Speed : 115 km/hr.
(With single rider 68 kg)
Climbing Ability : 26% max.
Note : All dimensions are under UNLADEN condition.
Above information is subject to change without any notice.
}
(inside cluster)

Related product manuals