Baldor VS1MD - CHAPTER 7 Parameter Descriptions

Parameter Descriptions 7-1
CHAPTER 7
Parameter Descriptions
7.1 Overview
The following information is provided for each parameter listed in table 7.1 along with
its description:
The parameters are presented in numerical order within each of the fivegroups
(Dispay, Basic Parameters, Terminal, Function Group 1, Function Group 2). Appendix
B contains a list of parameters by name cross-referenced to parameter number.
Parameter Number: Unique number assigned to each parameter.
Parameter Name: Unique name assigned to each parameter.
LED Display: Display shown on LED screen when parameter is
accessed.
Range: Predefined parameter limits or selections. Note that
a negative Hz value indicates reverse rotation.
Default: Factory default setting.
Access:
• Read Only: Parameter value can not be modified
by user.
• Configurable: Parameter can only be modified
while drive is stopped.
• Tunable: Parameter can be modified while drive
is running or stopped.
Group: Menu group within which parameter is located.
See also: Associated parameters that may provide additional
or related information.