Balluff BNI ECT-508-105-Z015 - 7 Display; General; Control and Display; Design and Symbols

www.balluff.com
27
7 Display
7.1. General
With the built-in display, the station alias is output directly to the devices BNI ECT…
The display also shows information about the version of the hardware and firmware.
7.2. Control and
display
1 Display
2 Arrow key
3 "Set" key
4 LED
7.3. Design and
symbols
In the following flow charts, some symbols are used to describe the display functionality:
7.4. Commissioning
S
↑
1
2
3
4
Current status
Switch
S
Condition: press the set button momentarily
S
Condition: press and hold the set button (at least 3 seconds)

Condition: press the arrow button momentarily
STATION
ALIAS
1001
VERSION
H W : 1 . 0
S W : 1 . 0
Hardware and firmware update
Station alias
BNI
ECT-508-
105-Z015
Module name