Banner AG4 Series Original Instructions

Banner AG4soft Software Instruction Manual
5 Configuring the Scanner (Setting Operational Parameters)
5.1 Configuration Requirements
Configuring the AG4 requires :
•
Connecting PC to AG4 (via RS232)
• Starting software and logging in as user
• Creating or editing an AG4 configuration with the wizard
• Creating protective field and/or warning field settings
• Downloading the configuration to the AG4
• Checking echo data (confirming the AG4 settings)
5.2 Installing software
NOTE : The AG4 is not required for installing the software on the PC .
Requirements :
•
If the PC and AG4 are already connected with one another , turn the AG4 power OFF .
• Close all other Windows applications .
1. Insert the CD ROM.
The installation boots up automatically .
2.
Open the Disk1 folder and double-click on the setup . exe file .
If the installation does not start automatically from the CD drive, open the folder \AG4soft\Disk1 and double-click the setup . exe file .
The installation wizard starts .
3. Click on [Next] .
The installation wizard opens the software license agreement.
4. To agree with the software license contract , click Yes .
5. To agree with the recommended installation path , click Next.
or ,
6.
To enter another path , Click on Browse.
7. Select another path and click on OK , then Next.
The wizard installs the software and creates a link on the desktop .
5.3 User Authorization
The following section describes the AG4soft program function access for each authorization level and the login process .
5.3.1
Authorization Level
The Authorization level login permits access to program functions on a need-to-use basis . In other words , the functions that are available depend on the
selected authorization level. Functions (buttons) that are not actionable in the software program appear as grayed-out versions of the original button.
No individual user names are required for the login , but an authorization level must be selected .
The functions for each authorization levels are listed below :
Banner AG4 Software Manual 144923 rev . A 02 1 2010 13
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com

Banner AG4 Series Specifications

General

Brand	Banner
Model	AG4 Series
Category	Scanner
Language	English